Ultrastrength material Frame Arms adopt PA66+30GF Ultrastrength material design, provide better crashworthiness Integrated PCB wiring Using high strength compound PCB frame board, which makes wiring of ESCs and battery more safe and easier Huge assemble space Optimized frame design, provides abundant assemble space for autopilot systems Gorgeous Frame Arms Provide different color frame arms: red, white, black, which makes your flight more colorful

FlameWheel series is multi-rotor frame designed for all pilots for fun or AP. It can achieve hovering, cruising, even rolling and other flight elements. It can be applied for entertainment, aerial photography, FPV and other aeromodelling activities.

SPECIFICATIONS OF F550:
Model	Flame Wheel 550 (F550)
Frame Weight	478g
Diagonal Wheelbase	550mm
Takeoff Weight	1200g ~ 2400g
Recommended Propeller	10 x 4.5in ; 8 x 4.5in
Recommended Battery	3S ~ 4S LiPo
Recommended Motor	22 x 12mm (Stator size)
Recommended ESC	30A OPTO

**PLEASE READ**

• When flying, the fast rotating propellers of FlameWheel 550 will cause serious damage and injury. Therefore, please fly with a high safety consciousness.
• Keep flying multi-rotor away from objects, such as obstacles, human beings, high-voltage lines and so on.
• Do not get close to or even touch the working motors and propellers, which will cause serious injury.
• Do not over load the multi-rotor.
• Check whether the propellers and the motors are installed correctly and firmly before flight.
• Make sure the rotation direction of each propeller is correct.
• Check whether all parts of multi-rotor are in good condition before flight. Do not fly with old or broken parts.
• Use DJI parts as much as possible.
  
• Dj If you have any problem you cannot solve during installation, please contact our customer service.