SmallSpy 500mm Foldable Carbon Fiber ARF Quad Kit w/Aluminum arms

FRAME: HIGH QUALITY 500mm Foldable Carbon Fiber Quad frame w/Aluminum arms that fold back into a nice neat little package.

FRAME SPECIFICATIONS

CarbonCore SmallSpy 500mm Carbon Fibre Quadrocopter Multicopter, Direct Upgrade for the GAUI 330 and 330XS FPV UAV Quadrocopter

Frame: 1.0mm Carbon Fibre
Landing Legs: 1.5mm Carbon Fibre
Landing Skids: 2.0mm Carbon Fibre
Motor Center Diameter: 500mm

The virtual pictures show a solid black finish to the frames however these multicopters have a Woven Carbon Fibre finsh
CarbonCore Carbon Fibre used in this product now has an even shine on both sides

Motor Arms can be folded to make the frame much more compact for transport - Picture will be added

The SmallSpy Quadrocopter is a cost-effective alternative for use with only 4 motors
Recommended for use with the Micro Radius Camera Mount for aerial photography
Multicopters currently do not have display packaging
Supplied as a Kit - Requires Assembly

NAZA

Motor

Motors

Stator size: 22x12mm
KV: 920 rpm/V

ESC's
ESC

Current: 30A OPTO
Signal Frequency: 30Hz ~ 450Hz
Battery: 3S ~ 4S LiPo

Propellers

Adopt PC/ABS ultrastrength material design,fine surface hardness ,anti-impact
Dimensions: 10 x 4.5 in

NAZA Details:

All-in-One design

All-in-One Design integrates inner damping, controller, gyroscope, accelerometer and barometer, which simplifies installation and saves space.
Advanced attitude stabilization algorithm

Advanced mix guidance algorithm and control algorithm, inherits outstanding flight stability of DJI products, provides excellent maneuverability, gives hobbyists wonderful flight experience.
Low voltage protection

Two-level low voltage protection. low voltage LED alarm, and automatic landing.
D-BUS

D-Bus supports S-BUS receiver system
2-axis Gimbal Stabilization

The gimbal stabilization module is compatible with almost all 2-axis gimbal systems. The system will adjust the gimbal and camera according to the attitude of the helicopter after setting the parameters the first time.
Upgradeable and extendible

Easy firmware upgrade, extendible port for future use is available.

NAZA SPECIFICATIONS...

General
Built-In Functions	Autopilot
	Auto Level Fail-safe
	Low Voltage Protection
	S-Bus Receiver Support
	2-axle Gimbal Support
Peripheral
Supported Multi-rotor	Quad-rotor I, X;
	Hex-rotor I, V.
Supported ESC output	400Hz refresh frequency.
Recommended Transmitter	PCM or 2.4GHz with minimum 4 channels.
Assistant Software System Requirement	Windows XP SP3 / Windows 7

Electrical &Mechanical
Working Voltage Range	MC:4.8V ~ 5.5V
	VU: 7.2V ~ 26.0 V (recommend 2S ~ 6S LiPo)
Power Consumption	MAX1. 5W (0.3A@5V)
	Normal:0.6W (0.12A@5V)
Operating Temperature	-10 C ~ 50 C
Weight	MC:25g
	VU:20g
Dimensions	MC: 45.5mm x 31.5mm x 18.5mm
	VU: 32.2mm x 21.1mm x 7.7mm
Flight Performance (can be effected by mechanical performance and payloads)
Max Yaw Angular Velocity	190 / s
Max Tilt Angle	45
Ascent / Descent	+6m/s

**PLEASE READ**

When flying, the fast rotating propellers of FlameWheel will cause serious damage and injury. Therefore, please fly with a high safety consciousness.

Keep flying multi-rotor away from objects, such as obstacles, human beings, high-voltage lines and so on.
Do not get close to or even touch the working motors and propellers, which will cause serious injury.
Do not over load the multi-rotor.
Check whether the propellers and the motors are installed correctly and firmly before flight.
Make sure the rotation direction of each propeller is correct.
Check whether all parts of multi-rotor are in good condition before flight. Do not fly with old or broken parts.
Use DJI parts as much as possible.

If you have any problem you cannot solve during installation, please contact our customer service.

SmallSpy 500mm Foldable Carbon Fiber ARF Quad Kit w/Aluminum arms

All-in-One design

Advanced attitude stabilization algorithm

Low voltage protection

D-BUS

2-axis Gimbal Stabilization

Upgradeable and extendible